Heat shrink tubing, black with adhesive, various diameters from 4.8 to 39mm, shrink ratio 3:1

Our heat shrink tubing is coated on the inside with a hot melt adhesive, which creates a tight/bonded connection with the object being shrunk when heated. The shrink ratio is 3:1; for example, the 9.5mm heat shrink tubing will shrink down to 3.2mm when fully shrunk. The stated diameters are to be understood as internal diameters.

The heat shrink tubing with hot melt adhesive provides both electrical insulation and protection against moisture.

The following diameters are available:

• 4.8mm: Inner diameter before shrinking: 4.8mm, Inner diameter after max. shrinking: 1.6mm
• 6.4mm: Inner diameter before shrinking: 6.4mm, Inner diameter after max. shrinking: 2.2mm
• 9.5mm: Inner diameter before shrinking: 9.5mm, Inner diameter after max. shrinking: 3.2mm
• 12.7mm: Inner diameter before shrinking: 12.7mm, Inner diameter after max. shrinking: 4.2mm
• 19.1mm: Inner diameter before shrinking: 19.1mm, Inner diameter after max. shrinking: 6.3mm
• 25.4mm: Inner diameter before shrinking: 25.4mm, Inner diameter after max. shrinking: 8.4mm
• 39.0mm: Inner diameter before shrinking: 39.0mm, Inner diameter after max. shrinking: 13.4mm

Select the diameter and enter the desired length in pieces into the shopping cart. Sales are in 1 piece increments. One piece corresponds to one meter. If you need 5 meter lengths, please enter 5 pieces as the quantity.