Red heat shrink tubing with adhesive, various diameters from 3.0 to 39mm, shrink ratio 3:1

Our heat shrink tubing is coated with a hot-melt adhesive on the inside, which creates a tight/bonded connection with the object being shrunk when heated. The shrink ratio is 3:1; for example, the 9.5mm heat shrink tubing shrinks down to 3.2mm when fully shrunk. The specified diameters are to be understood as inner diameters.

Heat shrink tubing with hot-melt adhesive offers both electrical insulation and protection against moisture.

The following diameters are available:

• 3.0mm: Inner diameter before shrinking: 4.8mm, Inner diameter after max. shrinking: 1.2mm
• 4.8mm: Inner diameter before shrinking: 4.8mm, Inner diameter after max. shrinking: 1.6mm
• 6.4mm: Inner diameter before shrinking: 6.4mm, Inner diameter after max. shrinking: 2.2mm
• 9.5mm: Inner diameter before shrinking: 9.5mm, Inner diameter after max. shrinking: 3.2mm
• 12.7mm: Inner diameter before shrinking: 12.7mm, Inner diameter after max. shrinking: 4.2mm
• 19.1mm: Inner diameter before shrinking: 19.1mm, Inner diameter after max. shrinking: 6.3mm
• 25.4mm: Inner diameter before shrinking: 25.4mm, Inner diameter after max. shrinking: 8.4mm
• 39.0mm: Inner diameter before shrinking: 39.0mm, Inner diameter after max. shrinking: 13.4mm

Select the diameter and enter the desired length in pieces into the shopping cart. The delivery is in 1 piece increments. One piece corresponds to one meter. If you need 5-meter pieces, please enter 5 pieces as the quantity.