Fuse Panel 4-Gang, 12V and 24V

Fusing electrical circuits, customizing them to your wishes, and clearly labeling them. These are the features of this fuse panel.

The fuse panel with 4 individual circuit breakers can be used to fuse separate circuits. It has one circuit breaker each at 6A, 8A, 10A, and 12A. The 6A, 8A, and 10A breakers are pre-wired as a group on the input side, so a separate supply line from the battery does not have to be laid for each individual circuit breaker. This grouping can, of course, be dissolved by disconnecting/removing the bridge. On the output side, the breakers are, of course, completely independent of each other and fuse the respective connected circuit separately. If a circuit breaker has tripped due to overcurrent, this is visible as the operating knob will protrude significantly further. Once the overcurrent condition has been resolved, the circuit breaker can be reactivated by pushing in the operating knob.

Cables are connected via spade terminals (included in delivery).

Matching the VOTRONIC module system, the panels are offered with a uniform height of 85 mm, which can be used as individual devices or in combination. The versatile application possibilities allow the user to assemble a complete information and control center. Installation is simple and can be expanded at any time with additional switch or fuse panels and display panels.

For clear labeling of switches and fuses, an internationally understandable labeling sheet is available, allowing each switch/fuse to be easily and universally labeled individually. The pictogram film is transparent, self-adhesive, and abrasion-resistant printed to match the front panel design (optionally available), item number: PF70.

Scope of delivery:

• Fuse Panel 4 S, 12V and 24V
• 4 mounting screws
• 8 spade terminals 6.3mm, 1.5-2.5mm²
• Drilling template
• Of course, you will also receive operating instructions in German from us.