Tank Electrode 20 K-WC Rod Electrode specially for Cassette Toilets

Today, cassette toilets are absolutely standard in motorhomes. They are compactly designed and have an indicator, but unfortunately, it only shows when the tank is full. Once this state is reached, the toilet can no longer be used in the vehicle. Forward planning for disposal is not possible, making the silent place of convenience only usable to a limited extent.

The Tank Electrode 20 K-WC was developed based on the long-proven tank electrode to provide a full-fledged fill level indicator especially for use in cassette toilets. Its compact design allows the tank sensor to be easily screwed into the WC cassette from above using the included mounting ring. The necessary mounting hole of 38 mm diameter can be easily made with a hole saw. The fully potted electronics are designed to be waterproof (IP67) and suitable for the rough operation when flushing the WC cassette.

To change the cassette, the Tank Electrode 20 K-WC is disconnected from the vehicle via a robust 3-pin round connector, and the connector is secured to the cassette. The scope of delivery includes not only the 3-pin round connector but also a mounting ring and all necessary mounting materials.

The Tank Electrode 12-24K is designed for tanks with a minimum height of 12cm and a maximum height of 24cm. The electrode must be mounted from the top of the tank. The electrodes can be easily adjusted to the tank height by shortening them. The tank sensor is suitable for 12V and 24V continuous operation. The probe can be preset to the respective tank height using a rotary control.

Scope of delivery:

• 1 pc. Tank Electrode 20 K-WC
• 1 pc. sealing ring
• 1 pc. mounting ring
• 8 pcs. stainless steel screws 2.9 x 13 mm
• 1 pc. 3-pin socket with lock
• 1 pc. 3-pin plug
• 1 pc. self-adhesive retaining clip for plug
• Installation instructions