Bo-dapter Insulation Panels for Camper Floor (Sprinter)

The Bo-dapter floor insulation suitable for Sprinter Camper Vans combines the best of both worlds:
only 18 mm build-up above the sheet metal, with up to 39 mm XPS insulation layer at the deepest points.
This floor insulation thus ensures maximum insulation with the lowest possible build-up in height.

Bo-dapter floor insulation suitable for Sprinter Camper Vans

Discover the Bo-dapter – the innovative solution for effective insulation of your camper floor! Our XPS insulation boards are tread-resistant (300kPa) and weigh under 5 kg for the Sprinter in length L2 or 6.5 kg for length L3. With only 18 mm additional height to the floor panel, you maximize the standing height in your camper without compromising thermal or acoustic insulation. At the same time, cavities at all height levels of the floor panel are optimally filled with an insulation thickness of up to 39 mm to achieve the best possible insulation values. 

The floor insulation is made of extruded polystyrene foam (XPS), which is elaborately milled on a CNC machine to match the exact floor contour of the vehicle. In addition to its high thermal insulation effect, the material impresses with a high compressive strength of 300 kPa (approx. 30t/m²) and dimensional stability. Furthermore, the material is moisture-resistant and can be used at temperatures down to -50 °C. The XPS boards are also free of HBCD flame retardants, as well as chlorofluorocarbons (CFCs), HCFCs, and HFC-containing blowing agents.

Advantages of Bo-dapter insulation for your motorhome:

In addition to the extremely low weight of the XPS floor insulation itself, the full-surface installation offers further weight advantages when using the Bo-dapter. Due to the full-surface contact of the floor panel and the high compressive strength of the insulation, the overlying floor panel can be chosen to be almost arbitrarily thin, thus allowing for a weight reduction in the mid-double-digit kilogram range, depending on the chosen floor panel. Alternative insulation solutions usually rely on a wooden substructure, between which the actual insulation is installed. Since this cannot fulfill a load-bearing function and must not be compressed to achieve the insulation effect, the actual floor panel spans the underlying insulation and forms cavities. The floor panel must be chosen to be correspondingly thick to reduce deflection of the floor under load. With full-surface insulation using CNC-milled XPS elements, this problem does not exist, and the floor can rest fully on the surface and optimally transfer the load to the floor panel and the vehicle structure.

Installation and laying of the insulation boards in your van

The Bo-dapter is easy to install – in just 30 minutes to 1 hour you can complete the floor insulation of your Sprinter or Crafter. The full-surface contact of the boards prevents the floor from wobbling.